Project Main Details
We have the video in portuguese here:
Password: tramontinaduchas 2016-09-12 13:18:02 GMT 2016-11-29 08:00:00 (GMT -03:00) Brasilia Yes (click here to learn more about ) Closed 8 6 0 direct invitation(s) have been sent by the voice seeker resulting in 0 audition(s) and/or proposal(s) so far. Voice123 SmartCast is seeking 10 auditions and/or proposals for this project (approx.) Invitations sent by SmartCast have resulted in 8 audition(s) and/or proposal(s) so far.
• Audio files must be delivered via FTP/Dropbox/Google Drive/cloud
Tramontina - The pleasure of doing things beautifully well.
Tramontina showers were developed under rigorous technical standards to bring greater safety, comfort, and ease to your shower.
This is because Tramontina is a Brazilian company over one hundred years old, well-known for its products that unite design and high quality. Tramontina sells more than 18 thousand products in 120 countries.
Now you will learn how easy it is to install your new shower, ensuring an excellent, functional and comfortable shower at a low cost.
But always keep in mind that installation must be done by qualified individuals.
It is mandatory to disconnect the circuit breaker during the installation, maintenance, and cleaning of the product.
The smooth functioning of your shower depends on the height of the hydraulic installation. There must be more than 1 meter of water column at the appropriate height.
Check if the water exit connection is level with the wall and if the connection thread is half an inch.
If necessary, get extenders or reducing bushes.
Before installing the product, turn on the water and let it flow long enough to remove any dirt in the tubing.
If the pressure of the water is very strong, showers have a pressure reducer inside them. For the 3 temperature Senseday model, the reducer that comes with the product must be installed.
For a perfect seal, apply 4 turns of white sealing tape on the nipple threads.
After that, screw the nipple in the shower connection until it is tight enough.
Then, softly screw the showerhead in the wall, without the use of tools, until it is tight and the back part of the shower remains close to the wall.
Fix the shower’s hand support to the wall, within arm’s reach. If you prefer to use a screw, be aware of where the plumbing is located in order to avoid puncturing it.
Attach the hose to the tail connector.
Attach the hand shower to the other extremity of the hose.
Place it in the support.
After this, turn on the water and let it run through the shower until it is flowing normally. Check for any leaks.
Attention: in case the shower presents internal leaks, disconnect it immediately and take it to an Authorized Technical Assistance Center.
For the Sensetop Electronic Shower, attach the connecting rod to the lower part of the temperature selector button.
Before connecting electrical wires, turn on the water and let it flow, filling the heating chamber, in order to prevent the resistor from burning out.
Make sure that the tension of the shower corresponds to the tension of the electrical network in your home.
For safety reasons, get a direct, exclusive, and independent connection from the distribution board, using conductors and breakers of adequate capacities.
Read the details in the manual.
The electrical wiring box must be placed at a safe distance from the water exit in the wall.
To install, turn the temperature selector button to the “off” position.
After that, turn off the circuit breaker.
Get a porcelain connector and connect the shower wires to the electrical network wires.
To prevent electric shock, connect the ground wire to a grounding system.
Never use plugs or sockets in the electric installation of this product.
After double checking, turn on the circuit breaker.
Turn the temperature selector button to the desired heating position.
When opening the valve, the shower will start automatically.
You can choose the ideal temperature for your shower.
For this, you just have to turn off the water and turn the temperature selector button to the position that you prefer.
The Electronic Shower Sensetop is the only one that allows you to change the temperature of the water while showering without turning off the device to adjust the temperature.
In order to reduce the consumption of electric energy, you just need to choose the lower power position for hotter days. The lower the temperature, the lower the energy consumption.
Using a hand shower is very easy since Tramontina showers have an exclusive magical water diverter.
To activate it, you only need to pull the tip of the showerhead and the water will be automatically deviated.
To close it, just push it back to the initial position.
For external cleaning, use a dry or damp cloth.
Dirt and residue in the water can hinder the functioning of the product.
To clean the spray plate, use a brush to open the orifices.
If necessary, install devices or filters capable of blocking residue from reaching the product.
CHANGING THE RESISTOR
The resistor is inside the product and is responsible for heating the water. If you need to change it, start by turning off the water.
After that, disconnect the breaker to prevent electric shock.
With the breaker off and the water turned off, turn the temperature selector button to the "off" position.
To remove the spray plate, turn it counter-clockwise.
After that, disconnect the ground wire from the cover of the resistor chamber and bend it to the side.
Turn the cover of the resistor chamber counter-clockwise to open.
Detach the faulty resistor.
Then install the new resistor in the position of the previous one.
Put the cover of the resistor chamber back and turn it clockwise to close.
Put the spray plate back and turn it clockwise to close.
For the 3 temperature SenseDay model, the procedure starts by turning the superior part counter-clockwise.
Take it off and hold the electric set firmly. Place fingers on the rubber diaphragm. Then you will be able to pull and remove the resistor.
Place the new resistor on the pins and press it until it locks into place. The resistor must touch the diaphragm.
To reassemble it, make sure that the electric box is in the correct position and line up the word "off" in the center of the body. Then screw the top-nut.
Now, be careful to maintain the temperature selector button in the "off" position.
Turn on the water and let it run until it is flowing normally through the spray plate, filling the heating chamber, in order to prevent the resistor from burning out.
After that, turn the circuit breaker on again.
On the shower, place the temperature selector in the desired position.
That's it. Now you can turn on the valve. The water will be hot again.
And if the problem persists, look for an Authorized Technical Assistance Center that will be able to solve any problem presented by Tramontina Showers.
Feel the different sensations of the water.
Now you can enjoy the moment and relax because Tramontina Showers guarantee a comfortable and safe shower.
Voice123 Team Comments
Voice123 consultations with this voice seeker regarding this project and/or other projects by this voice seeker, via phone, chat, and/or email.
This project - phone.
Previous projects - phone.
This project - email or chat.
Previous projects - email or chat.
Note: Voice123 strives to establish the legitimacy of all projects posted. However, Voice123 subscribers and users are responsible for confirming information stated by prospective voice seekers, agents and/or clients. Voice123 subscribers and users assume all liability for use of any information found through Voice123, or any of its publications.
This page contains the most important details of this project. If you find the information on this project inaccurate or inappropriate, please let us know by contacting us.