Project Main Details
that´s why we are asking for british ...
BELOW YOU HAVE A SAMPLE OF THE SIZE OF THE SCRIPT....
IT IS NOT THE ACTUAL SCRIPT
BUT IT SHOULD NO BE BIGGER THAN THAT... IT MAY ACCTUALY BE SMALLER ( THE REAL SCRIPT IS NOT READY YET)
2009-03-04 08:14:07 GMT 2009-03-06 18:00:00 (GMT -03:00) Brasilia Yes (click here to learn more about ) Closed 34 13 0 direct invitation(s) have been sent by the voice seeker resulting in 0 audition(s) and/or proposal(s) so far. Voice123 SmartCast is seeking 50 auditions and/or proposals for this project (approx.) Invitations sent by SmartCast have resulted in 34 audition(s) and/or proposal(s) so far.
The ************************ Ltda would like to thank you for choosing this product! We believe you have carefully examined it before purchasing and we are sure it is going to provide you with excellent results and satisfaction of doing your work.
Read the instructions carefully before using the equipment. This manual contains important information on the machine operation and maintenance. Following the instructions thoroughly prevents accidents and waste of productive time, as well as the right procedure helps increase the product lifespan.
The long and satisfactory durability of the **** band saw will make up for the time it will take you to get familiar with the performance features and operation.
This manual should be considered as a component of the purchased equipment and must be kept at easy approaching to be consulted whenever it is needed.
Instructions are wide-ranging and include receiving the equipment as well as preventive maintenance and conservation along its lifespan. Also, the main replacing parts are indicated in this manual so as to provide easy identification when replacement is necessary.
Our efforts go farther: We have a technical support department always at your disposal.
2. THE EQUIPMENT
The******Horizontal Bandsaws are manufactured to slice lumber with high quality cutting. Therefore they need to receive blocks of lumber to be sawn according to their category, for instance, machines for soft wood such as pinus, eucalyptus, and machines for native woods commonly named hard woods.
The equipments are also classified according to the width of the wood to be sawn, that is, narrow or wide.
Equipments for narrow wood must be fed with blocks presenting at least three finished sides. In their turn, equipments for wide wood, should receive blocks with at least one sliced side that will serve as a base for the cuts.
Number of cuts and production may vary according to the number of desired heads that are manufactured concerning one single frame, thus, it is not possible to couple heads in their original structure.
The equipments use the original *****blades in order to guarantee perfect functioning.
This manual was elaborated to provide the correct operation, adjusting and maintenance. Our clients’ satisfaction always comes first.
We take great pride in saying that we are the first ones in Brazil to manufacture this kind of equipment, innovating the process of sawing wood.
According to our constant products improvement policy, the ************************ claims the right to make any alterations and advancements without any prior obligation concerning products that have been produced previously. Consequently, the content in the current manual is updated to the printing date, and it can be altered regardless previous warning.
Because the pictures in this manual have been taken from prototypes, some of the illustrations may present slight differences in detail in relation to your equipment. However. it does not imply instruction misundertandings or misleadings.
2.1. USE OF PROTECTIVE GEAR
A set of safety procedures must be observed like any other wood industry equipment to prevent accidents effectively.
It is important to highlight these simple but essential safety actions:
· Never adjust any part of the machine when it is on;
· Never clean the saw blade with your hands or any other piece in order to avoid accidental contact between the operator’s body parts and the saw. In this case, either the machine must be totally turned off or compressed air jet must be used;
· Be sure that the equipment is not working while greasing it;
· When electrical change is necessary, make sure the general electrical disconnect is disarmed;
· Use leather gloves while handling the saw blade due to the latter’s dangerous sharpening;
· Never work with the protective cap open;
· Immediately turn the equipment off if the saw bursts and only open the blade protective cap with the band wheels totally stopped;
· Use protective gear according to your country’s Job Safety Department rules or according to the Job Safety Technician’s recommendations;
An adequate workplace must be provided for the operator to safely perform his/her job.
The current safety rules in the country must be considered and the internal recommendations of the company must be observed concerning safety and health in the workplace.
We advise that the use of the following protective gear be mandatory:
- Wear goggles;
- Wear ear muffins;
- Wear safety shoes;
- Wear leather gloves while in contact with raw materials.
Adjusting should be started by leveling the conveyor belt. Leveling is usually done at the factory, but in case it is necessary, proceed as indicated below:
The saw guides are removed, a level is placed on the blade without the guides and the conveyor is adjusted in relation to the level shown in both directions.
In case a particular point is not equivalent to the one of the saw, the conveyor must be adjusted through two screws found on the sides of the conveyor. (see picture on the left).
After loosening the gray screw, the yellow one may be moved, which is used for both up and down adjusting. After the conveyor is adjusted to the same level of the saw, the gray screw is retightened for locking.
Important: The adjustment rarely fails, therefore leveling adjusting should be done through the guides. Such procedure is explained in the chapter for guide leveling.
Voice123 Team Comments
Voice123 consultations with this voice seeker regarding this project and/or other projects by this voice seeker, via phone, chat, and/or email.
This project - phone.
Previous projects - phone.
This project - email or chat.
Previous projects - email or chat.
Corporate web site for this voice-seeker confirmed by Voice123
Note: Voice123 strives to establish the legitimacy of all projects posted. However, Voice123 subscribers and users are responsible for confirming information stated by prospective voice seekers, agents and/or clients. Voice123 subscribers and users assume all liability for use of any information found through Voice123, or any of its publications.
This page contains the most important details of this project. If you find the information on this project inaccurate or inappropriate, please let us know by contacting us.