This page contains the most important details of this project. If you find the information on this project inaccurate or inappropriate, please let us know by contacting us.
Submit Audition/Proposal on this Project
Rate this Project
Invitation Inbox
Project Main Details
3323806
3323806
The following script is to be read in English and I will need in spanish in about a week or two (once I get it finished). However, for now, we only want the english but, need someone who will do both. Also, i need someone who is flexible and would be willing to do clips in the future if needed for a good price. This is for a PHONE SYSTEM but, i will need the files either emailed to me in WAV or MP3. You can also upload on my FTP which is easiest
.
File type and delivery of work MP3 or WAV
> Missing union status DONT CARE ABOUT THAT
> Voice gender - FEMALE
> Voice age YOUNG ADULT
> Budget information NOT SURE AS OF YET.I need a Spanish speaker because I am going to have a Spanish version
too, we are just not done with the script.
I also need someone who is flexible and can be contacted in the future
if I need another short clip or a small part of the audio added. Apr 04, 2005 17:18:22 (GMT -05:00) Eastern Time (US & Canada) Apr 05, 2005 00:00:00 (GMT -05:00) Eastern Time (US & Canada) No (click here to learn more about
)
Closed
10
6
0 direct invitation(s) have been sent by the voice seeker resulting in 0 audition(s) and/or proposal(s) so far.
.
File type and delivery of work MP3 or WAV
> Missing union status DONT CARE ABOUT THAT
> Voice gender - FEMALE
> Voice age YOUNG ADULT
> Budget information NOT SURE AS OF YET.I need a Spanish speaker because I am going to have a Spanish version
too, we are just not done with the script.
I also need someone who is flexible and can be contacted in the future
if I need another short clip or a small part of the audio added. Apr 04, 2005 17:18:22 (GMT -05:00) Eastern Time (US & Canada) Apr 05, 2005 00:00:00 (GMT -05:00) Eastern Time (US & Canada) No (click here to learn more about
)
Closed
10
6
0 direct invitation(s) have been sent by the voice seeker resulting in 0 audition(s) and/or proposal(s) so far.
Project Parameters
None
To be defined
Audiobooks
Not defined
English - North American AND Spanish - ANY
Not defined
Young Adult Female OR Middle Age Female
• Audio files must be delivered via FTP
There are no special pre-, post-, or production requirements for this project.
Not defined
Not defined
Script Details
Yes
/////////COMPLETE SCRIPT///////
Thank you for calling EmbroideryTechs. For English Press 1.
Once again, thank you for calling EmbroideryTechs. Please keep in mind billing does not begin until you are connected with a live technician. Please have your PIN readily available. If you do not have a PIN, please visit Embroidery.com or, press 0 to speak with the operator.
If you have a promotional code, please enter the pound key followed by the five digit promotional code number. Otherwise, please enter your 8 digit PIN now.
If you know your parties extension, you may dial the pound key followed by their 3 digit extension at any time.
For Embroidery Machine support, press 1. For Software Support, press 2. For Embroidery consulting, general questions and tips, press 3. For all other inquiries or to speak to the operator, press 0. To return to the previous menu, press the star key.
Machines (1):
In order for us to provide optimal service, please have the make and model number of your machine readily available. For Tajima press 1. For Toyota press 2. For Melco press 3. For Barudan press 4. For Happy press 5. For Brother press 6. For ZSK press 7. For SWF or Inbro press 8. For Prodigy, CONSEW, AEMCO, or Generations, press 9. For any other machine or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Tajima (1.1):
For older Tajima machines such as TME-HC, TME-DC, TMEF, TME-C and all other Tajimas from the early 80s until mid 90s press 1. For Neo press 2. For newer Tajima models such as TMFX, TMEX and all other Tajimas from the mid 90 and newer, press 3. For all other Tajima models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Toyota (1.2):
For Toyota 800s and 8-20s, press 1. For Toyota 8-20A and 8-30 press 2. For Toyota 8-50 and 8-60, press 3. For Toyota 9000, press 4. For all other Toyota models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Melco (1.3):
For Melco Starlet, press 1. For Melco Superstar press 2. For Melco EM models press 3. For Melco EMC models press 4. For Melco EMT models press 5. For Melco EP or EB models press 6. For Melco CH models press 7. For Amaya, press 8. For all other Melco models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Barudan (1.4):
Barudan machines models are categorized by series. To find the series of your machine, please refer to the third and forth letters in the model number. (pause) For Barudan BEAT, press 1. For single head Barudans, press 2. For D series machines, press 3. For N series machines, press 4. For M series machines, press 5. For older Barudan series such as SR, JR, HJ and X, press 6. For all other Barudan machines or to speak to the operator, press 0. To return to the previous menu, press the star key.
Happy (1.5):
For HCG models press 1. For HCM models press 2. For HMF models press 3. For HCA models press 4. For the Voyager, press 5. For all other happy models or to speak to the operator, press 0. To return to the previous menu, press the star key.
Brother (1.6):
For Brother Models 4-15 press 1. For Brother Models 4-16 press 2. For Brother Models 4-32, press 3. For the Brother models BES and BE, press 4. For all other Brother models or to speak to the operator, press 0. To return to the previous menu, press the star key.
ZSK (1.7):
SWF, INBRO (1.8):
For SWF machines, press 1. For Inbro machines, press 2. To return to the previous menu, please press the star key.
Prodigy, CONSEW, AEMCO, Generations (1.9):
Software (2):
For Proel software press 1. For Data Stitch software press 2. For Compucon software press 3. For Sierra Software, press 4. For IDS, ADS, or Generations software, press 5. For Soft Foundry software press 6. For Origins press 7. For Melco software press 8. For Brother Software press 9. For any other software packages or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.1):
For WinFashion, press 1. For Proflex, press 2. For Propunch press 3. For all other Proel software packages, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.2):
For Data Stitch Dos based software, press 1. For Data Stitch Windows based software such as Stitch 98, Stitch ME, Stitch 2000 and Stitch Pro, press 2. For IntelliStitch, press 3. For all other Data-Stitch software, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.3):
Other (3):
For general questions about the operation of embroidery machinery or of the machine mechanics not specific to any make or model, press 1. For questions in regards to running an embroidery business such as pricing, billing, marketing and other similar questions, press 2. For questions in regards to embroidery such as hooping, appliquι, threads, needles, backing, and other related topics, press 3. For questions in regards to digitizing, editing, and other embroidery design related questions press 4. For all other questions, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Other sounds:
Billing has started.
Billing has stopped.
Thank you for calling. Good bye.
The customer you are calling in unavailable. Please press 1 to try again or 2 to dial a different number
Please wait while I try to connect you with the customer
Please enter the customers phone number followed by the pound key
Please enter you 8 digits PIN now.
You have selected an incorrect menu item.
I am sorry but the operator is currently unavailable
I am sorry but all the technicians are currently occupied.
Your PIN has been accepted
The PIN you have entered in invalid
The promotional code number you entered has been accepted
The promotional code number you entered has already expired
The promotional code number you entered is invalid
Hello, this is a call from EmbroideryTechs. To accept this call, press the star key. To decline the call, simply hang-up
Please wait while I try to connect you with a technician.
Please wait while I try to connect you with the operator.
Hold music (with music in the background, looped):
Thank you for your patience as I connect you with a live technician. Please keep in mind, that this call is not billed until you are connect with a live technician. (pause). Are you looking to buy or sell an embroidery machine? If so, please visit TheEmbroideryWarehouse.com or call 866-257-8727. International customer and local customers may also call 817-346-7961. Once again, thats 866-257-8727 or 817-346-7691. (pause). Did you know that EmbroideryTechs is on of the largest and most advanced embroidery support systems in the United States and growing rapidly in other countries as well? We take pride in the fact that all of our technicians are considered the most experienced in their field of service. If you have questions, comments, or suggestions about our system, we higlhy encourage you to let us know what you think by visiting EmbroideryTechs.com. (pause, loop) Thank you for calling . For English Press 1.
Once again, thank you for calling . Please keep in mind billing does not begin until you are connected with a live technician. Please have your PIN readily available. If you do not have a PIN, please visit .com or, press 0 to speak with the operator.
If you have a promotional code, please enter the pound key followed by the five digit promotional code number. Otherwise, please enter your 8 digit PIN now.
If you know your parties extension, you may dial the pound key followed by their 3 digit extension at any time.
For Machine support, press 1. For Software Support, press 2. For Embroidery consulting, general questions and tips, press 3. For all other inquiries or to speak to the operator, press 0. To return to the previous menu, press the star key.
Machines (1):
In order for us to provide optimal service, please have the make and model number of your machine readily available. For Tajima press 1. For Toyota press 2. For Melco press 3. For Barudan press 4. For Happy press 5. For Brother press 6. For ZSK press 7. For SWF or Inbro press 8. For Prodigy, CONSEW, AEMCO, or Generations, press 9. For any other machine or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Tajima (1.1):
For older Tajima machines such as TME-HC, TME-DC, TMEF, TME-C and all other Tajimas from the early 80s until mid 90s press 1. For Neo press 2. For newer Tajima models such as TMFX, TMEX and all other Tajimas from the mid 90 and newer, press 3. For all other Tajima models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Toyota (1.2):
For Toyota 800s and 8-20s, press 1. For Toyota 8-20A and 8-30 press 2. For Toyota 8-50 and 8-60, press 3. For Toyota 9000, press 4. For all other Toyota models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Melco (1.3):
For Melco Starlet, press 1. For Melco Superstar press 2. For Melco EM models press 3. For Melco EMC models press 4. For Melco EMT models press 5. For Melco EP or EB models press 6. For Melco CH models press 7. For Amaya, press 8. For all other Melco models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Barudan (1.4):
Barudan machines models are categorized by series. To find the series of your machine, please refer to the third and forth letters in the model number. (pause) For Barudan BEAT, press 1. For single head Barudans, press 2. For D series machines, press 3. For N series machines, press 4. For M series machines, press 5. For older Barudan series such as SR, JR, HJ and X, press 6. For all other Barudan machines or to speak to the operator, press 0. To return to the previous menu, press the star key.
Happy (1.5):
For HCG models press 1. For HCM models press 2. For HMF models press 3. For HCA models press 4. For the Voyager, press 5. For all other happy models or to speak to the operator, press 0. To return to the previous menu, press the star key.
Brother (1.6):
For Brother Models 4-15 press 1. For Brother Models 4-16 press 2. For Brother Models 4-32, press 3. For the Brother models BES and BE, press 4. For all other Brother models or to speak to the operator, press 0. To return to the previous menu, press the star key.
ZSK (1.7):
SWF, INBRO (1.8):
For SWF machines, press 1. For Inbro machines, press 2. To return to the previous menu, please press the star key.
Prodigy, CONSEW, AEMCO, Generations (1.9):
Software (2):
For Proel software press 1. For Data Stitch software press 2. For Compucon software press 3. For Sierra Software, press 4. For IDS, ADS, or Generations software, press 5. For Soft Foundry software press 6. For Origins press 7. For Melco software press 8. For Brother Software press 9. For any other software packages or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.1):
For WinFashion, press 1. For Proflex, press 2. For Propunch press 3. For all other Proel software packages, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.2):
For Data Stitch Dos based software, press 1. For Data Stitch Windows based software such as Stitch 98, Stitch ME, Stitch 2000 and Stitch Pro, press 2. For IntelliStitch, press 3. For all other Data-Stitch software, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.3):
Other (3):
For general questions about the operation of embroidery machinery or of the machine mechanics not specific to any make or model, press 1. For questions in regards to running an embroidery business such as pricing, billing, marketing and other similar questions, press 2. For questions in regards to embroidery such as hooping, appliquι, threads, needles, backing, and other related topics, press 3. For questions in regards to digitizing, editing, and other embroidery design related questions press 4. For all other questions, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Other sounds:
Billing has started.
Billing has stopped.
Thank you for calling. Good bye.
The customer you are calling in unavailable. Please press 1 to try again or 2 to dial a different number
Please wait while I try to connect you with the customer
Please enter the customers phone number followed by the pound key
Please enter you 8 digits PIN now.
You have selected an incorrect menu item.
I am sorry but the operator is currently unavailable
I am sorry but all the technicians are currently occupied.
Your PIN has been accepted
The PIN you have entered in invalid
The promotional code number you entered has been accepted
The promotional code number you entered has already expired
The promotional code number you entered is invalid
Hello, this is a call from EmbroideryTechs. To accept this call, press the star key. To decline the call, simply hang-up
Please wait while I try to connect you with a technician.
Please wait while I try to connect you with the operator.
Hold music (with music in the background, looped):
Thank you for your patience as I connect you with a live technician. Please keep in mind, that this call is not billed until you are connect with a live technician. (pause). Are you looking to buy or sell an embroidery machine? If so, please visit TheEmbroideryWarehouse.com or call 866-257-8727. International customer and local customers may also call 817-346-7961. Once again, thats 866-257-8727 or 817-346-7691. (pause). Did you know that EmbroideryTechs is on of the largest and most advanced embroidery support systems in the United States and growing rapidly in other countries as well? We take pride in the fact that all of our technicians are considered the most experienced in their field of service. If you have questions, comments, or suggestions about our system, we higlhy encourage you to let us know what you think by visiting EmbroideryTechs.com. (pause, loop)
Thank you for calling EmbroideryTechs. For English Press 1.
Once again, thank you for calling EmbroideryTechs. Please keep in mind billing does not begin until you are connected with a live technician. Please have your PIN readily available. If you do not have a PIN, please visit Embroidery.com or, press 0 to speak with the operator.
If you have a promotional code, please enter the pound key followed by the five digit promotional code number. Otherwise, please enter your 8 digit PIN now.
If you know your parties extension, you may dial the pound key followed by their 3 digit extension at any time.
For Embroidery Machine support, press 1. For Software Support, press 2. For Embroidery consulting, general questions and tips, press 3. For all other inquiries or to speak to the operator, press 0. To return to the previous menu, press the star key.
Machines (1):
In order for us to provide optimal service, please have the make and model number of your machine readily available. For Tajima press 1. For Toyota press 2. For Melco press 3. For Barudan press 4. For Happy press 5. For Brother press 6. For ZSK press 7. For SWF or Inbro press 8. For Prodigy, CONSEW, AEMCO, or Generations, press 9. For any other machine or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Tajima (1.1):
For older Tajima machines such as TME-HC, TME-DC, TMEF, TME-C and all other Tajimas from the early 80s until mid 90s press 1. For Neo press 2. For newer Tajima models such as TMFX, TMEX and all other Tajimas from the mid 90 and newer, press 3. For all other Tajima models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Toyota (1.2):
For Toyota 800s and 8-20s, press 1. For Toyota 8-20A and 8-30 press 2. For Toyota 8-50 and 8-60, press 3. For Toyota 9000, press 4. For all other Toyota models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Melco (1.3):
For Melco Starlet, press 1. For Melco Superstar press 2. For Melco EM models press 3. For Melco EMC models press 4. For Melco EMT models press 5. For Melco EP or EB models press 6. For Melco CH models press 7. For Amaya, press 8. For all other Melco models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Barudan (1.4):
Barudan machines models are categorized by series. To find the series of your machine, please refer to the third and forth letters in the model number. (pause) For Barudan BEAT, press 1. For single head Barudans, press 2. For D series machines, press 3. For N series machines, press 4. For M series machines, press 5. For older Barudan series such as SR, JR, HJ and X, press 6. For all other Barudan machines or to speak to the operator, press 0. To return to the previous menu, press the star key.
Happy (1.5):
For HCG models press 1. For HCM models press 2. For HMF models press 3. For HCA models press 4. For the Voyager, press 5. For all other happy models or to speak to the operator, press 0. To return to the previous menu, press the star key.
Brother (1.6):
For Brother Models 4-15 press 1. For Brother Models 4-16 press 2. For Brother Models 4-32, press 3. For the Brother models BES and BE, press 4. For all other Brother models or to speak to the operator, press 0. To return to the previous menu, press the star key.
ZSK (1.7):
SWF, INBRO (1.8):
For SWF machines, press 1. For Inbro machines, press 2. To return to the previous menu, please press the star key.
Prodigy, CONSEW, AEMCO, Generations (1.9):
Software (2):
For Proel software press 1. For Data Stitch software press 2. For Compucon software press 3. For Sierra Software, press 4. For IDS, ADS, or Generations software, press 5. For Soft Foundry software press 6. For Origins press 7. For Melco software press 8. For Brother Software press 9. For any other software packages or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.1):
For WinFashion, press 1. For Proflex, press 2. For Propunch press 3. For all other Proel software packages, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.2):
For Data Stitch Dos based software, press 1. For Data Stitch Windows based software such as Stitch 98, Stitch ME, Stitch 2000 and Stitch Pro, press 2. For IntelliStitch, press 3. For all other Data-Stitch software, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.3):
Other (3):
For general questions about the operation of embroidery machinery or of the machine mechanics not specific to any make or model, press 1. For questions in regards to running an embroidery business such as pricing, billing, marketing and other similar questions, press 2. For questions in regards to embroidery such as hooping, appliquι, threads, needles, backing, and other related topics, press 3. For questions in regards to digitizing, editing, and other embroidery design related questions press 4. For all other questions, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Other sounds:
Billing has started.
Billing has stopped.
Thank you for calling. Good bye.
The customer you are calling in unavailable. Please press 1 to try again or 2 to dial a different number
Please wait while I try to connect you with the customer
Please enter the customers phone number followed by the pound key
Please enter you 8 digits PIN now.
You have selected an incorrect menu item.
I am sorry but the operator is currently unavailable
I am sorry but all the technicians are currently occupied.
Your PIN has been accepted
The PIN you have entered in invalid
The promotional code number you entered has been accepted
The promotional code number you entered has already expired
The promotional code number you entered is invalid
Hello, this is a call from EmbroideryTechs. To accept this call, press the star key. To decline the call, simply hang-up
Please wait while I try to connect you with a technician.
Please wait while I try to connect you with the operator.
Hold music (with music in the background, looped):
Thank you for your patience as I connect you with a live technician. Please keep in mind, that this call is not billed until you are connect with a live technician. (pause). Are you looking to buy or sell an embroidery machine? If so, please visit TheEmbroideryWarehouse.com or call 866-257-8727. International customer and local customers may also call 817-346-7961. Once again, thats 866-257-8727 or 817-346-7691. (pause). Did you know that EmbroideryTechs is on of the largest and most advanced embroidery support systems in the United States and growing rapidly in other countries as well? We take pride in the fact that all of our technicians are considered the most experienced in their field of service. If you have questions, comments, or suggestions about our system, we higlhy encourage you to let us know what you think by visiting EmbroideryTechs.com. (pause, loop) Thank you for calling . For English Press 1.
Once again, thank you for calling . Please keep in mind billing does not begin until you are connected with a live technician. Please have your PIN readily available. If you do not have a PIN, please visit .com or, press 0 to speak with the operator.
If you have a promotional code, please enter the pound key followed by the five digit promotional code number. Otherwise, please enter your 8 digit PIN now.
If you know your parties extension, you may dial the pound key followed by their 3 digit extension at any time.
For Machine support, press 1. For Software Support, press 2. For Embroidery consulting, general questions and tips, press 3. For all other inquiries or to speak to the operator, press 0. To return to the previous menu, press the star key.
Machines (1):
In order for us to provide optimal service, please have the make and model number of your machine readily available. For Tajima press 1. For Toyota press 2. For Melco press 3. For Barudan press 4. For Happy press 5. For Brother press 6. For ZSK press 7. For SWF or Inbro press 8. For Prodigy, CONSEW, AEMCO, or Generations, press 9. For any other machine or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Tajima (1.1):
For older Tajima machines such as TME-HC, TME-DC, TMEF, TME-C and all other Tajimas from the early 80s until mid 90s press 1. For Neo press 2. For newer Tajima models such as TMFX, TMEX and all other Tajimas from the mid 90 and newer, press 3. For all other Tajima models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Toyota (1.2):
For Toyota 800s and 8-20s, press 1. For Toyota 8-20A and 8-30 press 2. For Toyota 8-50 and 8-60, press 3. For Toyota 9000, press 4. For all other Toyota models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Melco (1.3):
For Melco Starlet, press 1. For Melco Superstar press 2. For Melco EM models press 3. For Melco EMC models press 4. For Melco EMT models press 5. For Melco EP or EB models press 6. For Melco CH models press 7. For Amaya, press 8. For all other Melco models or to speak to the operator, press 0. To return to the previous menu, please press the star key.
Barudan (1.4):
Barudan machines models are categorized by series. To find the series of your machine, please refer to the third and forth letters in the model number. (pause) For Barudan BEAT, press 1. For single head Barudans, press 2. For D series machines, press 3. For N series machines, press 4. For M series machines, press 5. For older Barudan series such as SR, JR, HJ and X, press 6. For all other Barudan machines or to speak to the operator, press 0. To return to the previous menu, press the star key.
Happy (1.5):
For HCG models press 1. For HCM models press 2. For HMF models press 3. For HCA models press 4. For the Voyager, press 5. For all other happy models or to speak to the operator, press 0. To return to the previous menu, press the star key.
Brother (1.6):
For Brother Models 4-15 press 1. For Brother Models 4-16 press 2. For Brother Models 4-32, press 3. For the Brother models BES and BE, press 4. For all other Brother models or to speak to the operator, press 0. To return to the previous menu, press the star key.
ZSK (1.7):
SWF, INBRO (1.8):
For SWF machines, press 1. For Inbro machines, press 2. To return to the previous menu, please press the star key.
Prodigy, CONSEW, AEMCO, Generations (1.9):
Software (2):
For Proel software press 1. For Data Stitch software press 2. For Compucon software press 3. For Sierra Software, press 4. For IDS, ADS, or Generations software, press 5. For Soft Foundry software press 6. For Origins press 7. For Melco software press 8. For Brother Software press 9. For any other software packages or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.1):
For WinFashion, press 1. For Proflex, press 2. For Propunch press 3. For all other Proel software packages, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.2):
For Data Stitch Dos based software, press 1. For Data Stitch Windows based software such as Stitch 98, Stitch ME, Stitch 2000 and Stitch Pro, press 2. For IntelliStitch, press 3. For all other Data-Stitch software, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Software (2.3):
Other (3):
For general questions about the operation of embroidery machinery or of the machine mechanics not specific to any make or model, press 1. For questions in regards to running an embroidery business such as pricing, billing, marketing and other similar questions, press 2. For questions in regards to embroidery such as hooping, appliquι, threads, needles, backing, and other related topics, press 3. For questions in regards to digitizing, editing, and other embroidery design related questions press 4. For all other questions, or to speak to the operator, press 0. To return to the previous menu, press the star key.
Other sounds:
Billing has started.
Billing has stopped.
Thank you for calling. Good bye.
The customer you are calling in unavailable. Please press 1 to try again or 2 to dial a different number
Please wait while I try to connect you with the customer
Please enter the customers phone number followed by the pound key
Please enter you 8 digits PIN now.
You have selected an incorrect menu item.
I am sorry but the operator is currently unavailable
I am sorry but all the technicians are currently occupied.
Your PIN has been accepted
The PIN you have entered in invalid
The promotional code number you entered has been accepted
The promotional code number you entered has already expired
The promotional code number you entered is invalid
Hello, this is a call from EmbroideryTechs. To accept this call, press the star key. To decline the call, simply hang-up
Please wait while I try to connect you with a technician.
Please wait while I try to connect you with the operator.
Hold music (with music in the background, looped):
Thank you for your patience as I connect you with a live technician. Please keep in mind, that this call is not billed until you are connect with a live technician. (pause). Are you looking to buy or sell an embroidery machine? If so, please visit TheEmbroideryWarehouse.com or call 866-257-8727. International customer and local customers may also call 817-346-7961. Once again, thats 866-257-8727 or 817-346-7691. (pause). Did you know that EmbroideryTechs is on of the largest and most advanced embroidery support systems in the United States and growing rapidly in other countries as well? We take pride in the fact that all of our technicians are considered the most experienced in their field of service. If you have questions, comments, or suggestions about our system, we higlhy encourage you to let us know what you think by visiting EmbroideryTechs.com. (pause, loop)
Please note that you should only use the script or your recording of it for auditioning purposes. The script is property, unless otherwise specified, of the voice seeker and it is protected by international copyright laws.
Voice-Seeker Details
Voice123 Team Comments
Voice123 consultations with this voice seeker regarding this project and/or other projects by this voice seeker, via phone, chat, and/or email.
This project - phone.
Previous projects - phone.
This project - email or chat.
Previous projects - email or chat.
Corporate web site for this voice-seeker confirmed by Voice123
Note: Voice123 strives to establish the legitimacy of all projects posted. However, Voice123 subscribers and users are responsible for confirming information stated by prospective voice seekers, agents and/or clients. Voice123 subscribers and users assume all liability for use of any information found through Voice123, LLC, or any of its publications.
