Project Main Details
Client estimates the video length to be between 10-15 minutes long.
Plan on additional changes down the road. (In which case additional money will be paid to talent.)
Three more videos are in the works, so VO talent, must also be available to do VO work in the next 6 months.
Lastly, we are looking for high quality audio, so please make sure the final format is AIF and is clean from outside noise.
2011-05-17 13:35:24 GMT 2011-05-19 09:19:22 (GMT -08:00) Pacific Time (US & Canada) Yes (click here to learn more about ) Closed - Note: This project was manually closed by the voice seeker before it reached its original deadline. 0 0 0 direct invitation(s) have been sent by the voice seeker resulting in 0 audition(s) and/or proposal(s) so far. Voice123 SmartCast is seeking 80 auditions and/or proposals for this project (approx.) Invitations sent by SmartCast have resulted in 0 audition(s) and/or proposal(s) so far.
• Audio files must be delivered via FTP/Dropbox/Google Drive/cloud
Make sure the ERT is still positioned vertically, mark the bottom mounting hole. Drill the pilot hole or mount the anchor (you may need to remove the ERT in order to put the anchor in place).
With the ERT positioned correctly, drive the bottom screw until it is snug. Remember, don’t over tighten the screw. It just needs to be snug.
Now that the ERT has been installed with proper, vertical orientation and the screws are snug, you are ready to connect the meter cable to the inline connector. (If you are also connecting a leak sensor, you will attach that connector as well.)
Remove the protective cover from the connection port on the endpoint. If you are installing a dual-port endpoint, the black port goes to the meter, and the blue port is for the leak sensor.
Inspect the port and the cable to ensure that there is no damage to the three pins or the cable. Also make sure the O-ring is in place. If there is any damage, or if the O-ring is missing, do not install the endpoint.
Connect the inline connector to the ERT by rotating the keyed tabs until they align, and then pushing the connection together firmly. Slide the black coupling over the O-ring, making sure that the O-ring doesn’t move out of position, and then twist the coupling nut until the black tabs align.
Voice123 Team Comments
Voice123 consultations with this voice seeker regarding this project and/or other projects by this voice seeker, via phone, chat, and/or email.
This project - phone.
Previous projects - phone.
This project - email or chat.
Previous projects - email or chat.
Corporate web site for this voice-seeker confirmed by Voice123
Note: Voice123 strives to establish the legitimacy of all projects posted. However, Voice123 subscribers and users are responsible for confirming information stated by prospective voice seekers, agents and/or clients. Voice123 subscribers and users assume all liability for use of any information found through Voice123, or any of its publications.
This page contains the most important details of this project. If you find the information on this project inaccurate or inappropriate, please let us know by contacting us.